Sci Construction Tech

Menu

Understanding OSHA: Important Information

No Comments
| osha compliance training santa rosa ca

Imagine a workplace that was unsafe and that had no laws in place to change that. What if you were forced to work for such a company just to pay the bills? If you refused to complete the work, you were fired with no questions asked. Before the Occupational Safety & health Administration became a part of the U.S. Department of labor, this is a scenario that workers faced every single day. In these days there were no employer handbooks that outlined safety precautions or standards and there was no worker’s compensation to cover injuries.  No one was there to make sure employers maintained safety. Jobs were dangerous and employees were forced to work or else.

OSHA signed the OSHA Act into effect in 1970 changing the way that companies do business and the safety that employees working for these companies were able to maintain. No one should be forced to work in such unsafe conditions and that is the change that OSHA made. This act made workplaces safer for employees and created less dangerous situations for them. OSHA has grown significantly in those 40 years but for the better.  Nowadays workers in dangerous work environments must complete specialized osha compliance training santa rosa ca that ensures they are safe.

osha compliance training santa rosa ca

OSHA oversees all private sector employees and some public sector employers as well.  They oversee employers in California and beyond. Before OSHA, the National Safety Council reported an average of 38 on the job deaths every single day! Now, there are only 12 worker deaths per day across the globe. Even one death is too many but the drastic reduction in deaths shows just how effective OSHA really is. And, the organization continually works to improve safety in workplaces to continue decreasing these numbers.

Read More »

One Welding Angle To Consider

No Comments
| welding company palatka fl

welding company palatka fl

Welding works is a specialized field, no doubt about that. It is also an artisanal practice that caters for a wide variety of industries. You name it, think of it and jot it down on paper so long. Common sense is all that you need, so this exercise won’t take you long to get around. In the meantime, here’s a welding company palatka fl angle to read through so long.

This is a welding enterprise that specializes in custom and structural work. It also does repairs. Quality welding work completed could be indicative of strength and durability. The scale of the work conducted becomes immaterial. Most of the welding works with steel. This welding angle takes care of fence and heavy equipment repairs. It does need to utilize the resourcefulness of experienced welders.

They know how to manage their tools. They are also respectful of safety standards. They aim to comply with the OSHA standards. Commercial clients do need to work with professional welders that are appropriately certified. Commercial welders are generally customer-oriented these days. They will spare their clients the inconvenience of having to transport heavy equipment and machinery to their workshop.

Rather, they will conduct their welding work on the clients’ premises. No time is wasted as efforts are made to complete work as quickly but as efficiently as possible. This will spare the customers any long periods of downtime when breakdowns occur and subsequent repairs are required. Structural welding work will be a part of structural engineering work as well. Such an angle will be well utilized during a building construction project.

It also comes in good use on existing industrial lots where high levels of manufacturing and processing activity are quite common. But it can also serve the small-scale engineer in equal measures.   

Read More »

Getting Your Yard Where It Needs to Be

No Comments
| landscaping contractor falls church

Many people don’t realize just how big of a deal that it can be for you to try and figure out what is going on in the realm of landscaping. How can you make sure that you get a landscaping contractor falls church that is going to meet your needs and allow you to stay on top of whatever may be going on as well? Are there options that you want to consider and can you make sure that you’re getting the best results as well?

When you start to see this sort of thing, you want to make sure that you have a picture in your head in the first place. How much do you want to spend on the services? How much planting are you going to need to do? What sorts of steps do you need to take to make it easier on yourself? And how can you find the answers that are going to be the best for whatever you may be trying to accomplish? Taking the time to know what you want can be a big step toward what you may be trying to do as well.

landscaping contractor falls church

Take some time to figure out what may be going on and how to work things out. Many times, you are going to see that you can make strides and find answers that work out the best for you as well. You can get your yard to look great and you can actually feel pride in how the whole thing gets set up. And that, in the end, is going to be the best way for you to get ahead and find whatever it is that you may be looking for when it comes to your landscaping needs for your yard.

Read More »

What is a Thatched Roof?

No Comments
| add a thatched roof feature to your business.

The word thatch might conjure up images of straw houses, fairytale cottages, and old medieval villages, but thatch is still used today. It’s grass or straw that has been dried out and weaved into bundles, almost like hay, and it has many benefits for potential home and business owners.

First, thatch lasts a long time. While not as durable as shingles or other roofing materials, if cared for properly it can stay on a building for a while and still be just like new. Thatch is also waterproof, so you won’t have to worry about it getting wet or taking damage from the rain. How waterproof it is depends on the slope of the building, as a slope of around 45 degrees helps the rainwater to just slide off.

Thatch is also a natural insulator, keeping warm air in and cold air out. Having a thatched roof keeps warm air from escaping when it rises, so you’ll not only be warmer in the winter, but you’ll also be saving on heating bills. The savings alone are a reason to add a thatched roof feature to your business.

There’s also no denying that Thatch just looks cool, and is also a fun word to say! If you want your home to have a bit of a rustic look, or if you want to add a cooler look to your business, then thatch might be the best option for you. It can be an excellent marketing tool for your business as well, especially if you are going green or sell antique items.

add a thatched roof feature to your business.

What better way to show that antiques still have their value than using a thatched roof and showing off all it’s benefits to your customers? Thatch has many uses besides just being a prop or a roofing material for certain areas, and knowing about it could cause you to embrace thatch yourself!

Read More »

Cooling Tower Maintenance Services

No Comments
| industrial cooling tower services

Part of the process involved in running a cooling tower at your industrial site is ensuring that it is in optimal condition. These cooling towers can have a very good effect on the entire building. It will ensure that all your systems are running correctly and you have the appropriate cooling for various parts of your space. But you will also want to make sure that tower is operating in the way that you want. If proper maintenance is not being done over time, you will find that performance will degrade. And such performance degradations can cause issues for businesses.

One of the ways to get around the issue is to hire a professional outfit for industrial cooling tower services in the area. You will want to find a company that has a good history in offering cooling tower installation, repair and maintenance services. Only when a company is offering the full slate of services can you trust they will be able to take on the job for your business. They have the necessary expertise and know how regarding the various issues that can develop for a cooling tower. They also have the equipment and personnel to complete any maintenance and repairs efficiently.

industrial cooling tower services

A lot of work can be done to ensure that your system is operating at 100 percent efficiency. These jobs, such as fill replacement, driveshaft maintenance, oil changes, fan pitch adjustments, alignments and filtration system adjustments can make all the difference. While you could put some people on your company on such a project, it is a lot harder for them to have the expertise that is needed to properly maintain cooling towers. It makes a lot more sense to hire an outside company in the area that can offer you a great service at affordable rates.

Read More »

Common Roof Mistakes That Many Homeowners Make

No Comments
| roof installation melbourne Fl

If you do not have a good, solid roof over the home, you are in for a world of trouble. The roof is one of the most important components on the home. It protects you, the family, and the items that you’ve worked hard to buy from damage. There are many mistakes that can be made that put the roof at risk of damage. When this happens, you may not get the protection that you need and may even find the need for an expensive roof installation melbourne Fl. Read below to learn some of the most common roofing mistakes that homeowners make and make sure you avoid them at all costs.

Over Insulating

Insulating the attic is important if you want to ensure that your home’s energy-efficient and comfortable for many years to come. However, over-insulating the home could cause a lot of hassles for the roof that cost you dearly when all is said and done.  An over-insulated roof could lead to improper roof ventilation which causes many problems that you do not want to endure.

No Roof Inspections

Many homeowners assume that the roof is fine if they do not see any problems. And while it is true that there are signs that suggest problems with the roof, sometimes there are issues lurking beneath the surface that are not visible to the eye. Inspect the roof to ensure that you notice problems before they become a major concern.

roof installation melbourne Fl

Pressure Washing the Roof

Many people swear by pressure washing for the roof as a quick, affordable means of keeping the roof clean. However, using pressure washing techniques to clean the roof leaves it susceptible to risks such as mold. Do not pressure wash the roof to remove dirt and debris.

Read More »

Modern Day Construction Of Airports

No Comments
| airport master planning consultants

It is said that the aviation industry is experiencing something of a boom, never mind what the global supply of oil and gas, and its prices, continue to challenge aviation stakeholders with. Airports around the world continue to compete for the attentions of commercial and domestic foot traffic, all towards retaining the interests of high stakes stakeholders in what continues to be a highly profitable enterprise. And to serve the stakeholders’ purposes, there is no shortage of airport master planning consultants. And these consultants are being called upon to respond to the increasing demand for bigger passenger friendly airports that are able to achieve shorter queue turnarounds.

There is now a concerted shift towards what could be defined as a boutique airport. Less is more. And dynamite comes in small packages, that sort of thing. There is a move towards smaller aircraft carriers as well. These carriers, needless to say, cater for smaller groups of people and it is apparent that this is what the market is striving for. It is proving to be more profitable and acceptable to the public, both commercial and domestic. And if that is the case, then it has the potential to deliver a welcome return on investment to the airport businesses.

airport master planning consultants

Gate occupancy times will decrease with smaller fleets. Less traffic on the roads, and that’s got to be sustainable, surely. All this leads to a demand for an efficiently run airfield. There will be reduced runway occupancy times. And there will be shorter queues at the gates. Companies with stakes in such enterprises now need to be ready to cater for this new market shift. Master planning helps airport companies understand their future requirements. The master planning consultants can help these companies come up with a long-term and sustainable plan for the future.

Read More »

Primary Features Of Pipes And Tanks Lined With Rubber

No Comments
| rubber lined pipe

One of the main reasons why a company will be supplying its industrial clients with rubber lining has to do with providing them with corrosion resistance. The rubber lined pipe, stack, hopper, secondary containment liner, amongst others, has several primary features for its users. One of the features has already been mentioned, but just to reiterate, it is the provision of corrosion resistance. A second feature of rubber lining equipment has to do with reducing users’ maintenance challenges and downtimes.

All the apparatus mentioned thus far does form part of secondary lining systems. The secondary lining is made to protect the original surface or material. Secondary containment liners are necessary for the maintenance of the entire tank or containment system. The rubberized corrosion resistant materials are strong, durable and flexible. They are able to withstand the invasions usually expected from water, particularly if it’s been polluted or contaminated, and chemicals. Apart from its ability to resist corrosion and reduce maintenance work, rubber lining is sanitary and attractive for human use.

The rubber used is also resistant to abrasion. And in order to achieve the strength and durability of the rubber, the process of high pressure vulcanization is applied. In most industrial and public infrastructure settings, rubber lining remains necessary. Metal and other materials will continue to break down when liquid or moisture within a system is allowed to enter and cause corrosion. Through this invasion, contaminants are able to reach product material, causing all kinds of issues that negatively impact the integrity of the products.

rubber lined pipe

But when a secondary tank lining is made, sealing work and the provided resistance will ensure that the products’ integrity is maintained. In lowering maintenance requirements, the additional labor of repainting and re-sealing work will no longer be required.

Read More »

What is a hydraulic seal?

No Comments
| hydraulic seals

A hydraulic seal is a device that restricts the escape of fluids and foreign materials from entering its hydraulic application. Cylinder type applications would be good examples of hydraulic seals. These seals are designed to manage high pressure dynamic applications. They are installed to numerous types of machinery. The hydraulic seal remains an important component for ensuring that the set machinery is able to function correctly. Customized hydraulic seals are being used for the carrying out of rotary and reciprocating motions.

Hydraulic seal options include the following – rod seals, piston seals, rotary shaft seals, symmetrical seals and static seals. Components that go with the hydraulic seals include wipers, U cups, gaskets and oil and grease seals. Depending on the type of hydraulic seal being built, and its use, a variety of rings will be attached. These include V rings, wear rings, O rings, buffer rings, cast iron piston rings and backup rings. Apart from producing rotary and reciprocating motions, hydraulic seals will also be single or double acting.

hydraulic seals

Single acting hydraulic seals will be used to produce one axial motion only. Double acting seals, on the other hand, will be used in both directions in order to produce the reciprocating motions. Hydraulic seals are made from a variety of materials. These include – nitrile, polyurethane, silicone and fluorocarbon rubber. The seals will also be made from nylon and fabric reinforced rubber. And they can be molded from leather as well. PTFE used is bronze, nickel and glass filled, as the situation requires.

Other materials sourced for use have been abbreviated to EPDM and POM. Look up the acronym on the internet and you will be presented with the full definition. Interested readers can also source recorded demonstrations on how these seals operate.

Read More »

Better Air Conditioning for the Summer

No Comments
| SEER Tampa

You want to be sure that your air conditioning system is as good as it can be. You already know how expensive it is to run one so you will have to be sure that it has a high energy efficiency rating that can see you through the warmer months that Florida has so often.

Rating the Efficiency of HVAC Systems

In order to determine how energy efficient an air conditioner is, HVAC experts will run tests to come up with a SEER rating. Look to SEER Tampa services to learn more about this rating. Basically, it is a number value that is given to an air conditioning unit so you can know if it is working right.

If you have to have your AC repaired, it most likely has a lower SEER rating than it should. Perhaps it can be repaired to the point it has a better rating but really you should get a new one to be absolutely sure that it is as energy efficient as it can be. Choose a good unit to make this happen.

SEER Tampa

Your Air Conditioner

The AC unit that you have in your home may end up using a lot of energy if you are not careful. It is much better to have a high efficiency air conditioner installed rather than going with an older model that has a lower rating.

You want to know that your air conditioner is using only the right amount of energy to cool your home. On top of that, you want to be sure your home is insulated and sealed with the right energy efficiency windows on the home.

Time for a Change

If you have now realized that it is high time to change to an energy efficient air conditioner, then you need to call on the local HVAC experts to come over and have a look.

Read More »

Recent Posts

  • Understanding OSHA: Important Information
  • One Welding Angle To Consider
  • Getting Your Yard Where It Needs to Be
  • What is a Thatched Roof?
  • Cooling Tower Maintenance Services

Archives

  • March 2019

Categories

  • add a thatched roof feature to your business.
  • airport master planning consultants
  • hydraulic seals
  • industrial cooling tower services
  • landscaping contractor falls church
  • osha compliance training santa rosa ca
  • roof installation melbourne Fl
  • rubber lined pipe
  • SEER Tampa
  • welding company palatka fl